How to Cut a Bathroom Mirror in Half

How to Cut a Mirror

In this home DIY tutorial we will show a simple way to cut a bathroom mirror in half. If you are trying to save money, you can cut an existing large unframed bathroom mirror to the size you need.

Cut a Bathroom Mirror

Do you have a large unframed mirror in your bathroom that you find is an eyesore?

Cut a Bathroom Mirror

We did. We had one in each bathroom.

Our solution was to take our large unframed mirror that spanned the whole vanity and recycle it by cutting it in half to create two separate more narrow mirrors that we framed and hung over each sink.

We took down the large mirror and initially went on the hunt for two tall and narrow mirrors that we could hang over each sink.

After lots of window shopping we kept coming up short on finding affordable, tall and thin mirrors that would be the exact dimensions we desired.

Cut a Bathroom Mirror

We decided we would cut our existing bathroom mirror down to the two identical sizes we wanted. This was a great solution for us because it was already the height we needed and of course it saved us money because we are using what we already had.

If you think this approach might be a solution for you and your bathroom mirror dilemma, follow along and watch the video below as we show you how we cut a bathroom mirror down to the size or sizes needed.

2022 Personalized Christmas Ornaments
*** Thanks so much for supporting our small shop – Moon Rock Prints – this holiday season! ***

How to Cut a Bathroom Mirror

SUPPLIES

Shop the products we used for this project in one place.

FYI: This post contains a few affiliate links to products we used to make this project. Gray House Studio does receive commissions for sales from these links but at no extra cost to you. We appreciate you supporting this site. Read our privacy and disclosure policy. You can also easily shop our recommended products here.

TUTORIAL VIDEO

STEPS

Cut a Bathroom Mirror

1. To begin we set the mirror on a large flat surface. We took a yard stick and marked with a Sharpie the measurements of the new mirror where we would need to make our cut.

Cut a Bathroom Mirror

2. Then we took a board which acts a straight edge for scoring the mirror and lined it up with the marks we made with the Sharpie.

Cut a Bathroom Mirror

Next we used a c-clamp to hold the board and the mirror to the table to make sure that it didn’t move once we started to make our cut.

Cut a Bathroom Mirror

On the side of the board that could not be clamped, we used a paint can as a weight to hold the board down.

Cut a Bathroom Mirror

3. Once everything was in place we squirted a few drops of glass cutting oil on the mirror where the cut would begin.

Cut a Bathroom Mirror

4. We grabbed the glass cutter and prepared to make our cut.

When starting the cut it is important to apply a good amount of pressure to force the blade down to score the glass.

Once you begin scoring, continue all the way across the mirror with out stopping. It is imperative to make one continuous score.

Any overlap in scores will result in an uneven cut.

Cut a Bathroom Mirror

5. After we made our cut, we lifted the mirror up slightly and then took the other side of the glass cutter (the end with the heavy metal ball) and tapped directly under the beginning of the score.

Once you start a crack the weight of the mirror will force the crack to run the entire length of the score. The result is the mirror breaks in two pieces.

Cut a Bathroom Mirror

After the mirror is cut, be careful handling the side that was scored. It will be sharp. We used fine grit sandpaper to smooth the edge making it safer to handle when we started framing it.

Cut a Bathroom Mirror

6. Once we cut the mirror into two pieces, the sizes we needed, we framed them, stained the frames and hung them back up in our bathroom.

Cut a Bathroom Mirror

Voila! Our one large mirror is now like two brand new mirrors! And that is how we cut a bathroom mirror.

PIN IT FOR LATER

A DIY tutorial showing how to cut a bathroom mirror in half. This step by step home renovation guide includes a video tutorial.

25 comments

  1. Robin

    Great video! I have 2 of those builder grade mirrors that are clipped to the wall. I want to try this since I can’t find the mirrors I want already made. My mirrors have a metal piece along the bottom, does this piece come off easily or do you cut it off?

    Reply

  2. Adrienne Malley

    Great tutorial. Gave an 80 year old the guts to try it!

    Reply

  3. Gary-Orlando

    Hi, Great tutorial…. But It looks like you would have had to cut the glass two times to get the ending sizes. or am I seeing it wrong? Just cutting it in half would be larger than your final size.

    Reply

  4. One Day Glass

    the facts have been discussed is really important. Thank you so much for sharing a great post.

    Reply

  5. One Day Glass

    Good article & excellent way to articulate. Keep it up.

    Reply

  6. Dominic Robertson

    Stunning article you have shared with us and it will be very valuable for me to increase my skills. I really impressed by your blog because you have good knowledge of remodeling tips. I really thankful to you.

    Reply

  7. Anonymous

    Can I cut the mirror affixed to the wall?

    Reply

    1. Gray House Studio

      We would recommend removing the mirror off the wall to cut it. To make it easier and safer to cut.

      Reply

  8. Grayson

    Can I cut a large mirror while it is glued to the bath wall so it is easier to remove?

    Reply

    1. Gray House Studio

      Hi Grayson – we would think it would be safer to have some help removing it in one piece and then cutting it while it is laying down on a flat surface.

      Reply

  9. Carol

    How thick was your mirror?

    Reply

    1. Gray House Studio

      Hi Carol – Shoot, we don’t know off hand and now they are all framed. I would think they were just your standard builder grade mirror. Sorry!

      Reply

  10. Anonymous

    Great video!!! Thank you

    Reply

  11. Jim

    Does a beveled edge mirror cause any difficulties or is it the same process

    Reply

    1. Gray House Studio

      Hi Jim. The process is the same although it can be tricky to maintain consistent pressure and a straight cut on the bevel. The glass will crack along the score. Hope that helps and let us know how it goes. -Brent

      Reply

  12. Mimi

    Pls. Share where to shop thin silver metal frame fir mirror?

    Reply

  13. Kirsten

    We have a large mirror like that and were hoping to gut it both vertical and horizontal. can you cut the mirror horizontally as well?

    Reply

    1. Gray House Studio

      Yes, you can cut a large mirror any direction. For the best results try to find a straightedge that is as long as the cut so you don’t have to stop and move the straightedge.

      Reply

  14. Maria

    How did you go about taking it down from the wall without breaking it? Mine are all glued to the wall… Or maybe yours were on brackets?

    Reply

  15. Lori

    I have an oval shaped, open faced clock that we want to use as a frame around our downstairs bathroom mirror. Our current mirror is too round so I would like to cut a big mirror to fit the Oval clock. Any advice on cutting an oval shaped mirror?

    Reply

    1. Gray House Studio

      Hi Lori, That is a tough one. I don’t know how to cut an oval shape without using a special tool. – Brent

      Reply

      1. d

        take it to a glass shop but they may say they cant guarantee the glass wont break

        Reply

  16. Laura

    how did you hang the mirrors back up? Most of those huge mirrors have at least 4 clips with screws in them so the mirror is fixed to the wall.

    Reply

    1. Gray House Studio

      Hi Laura! After we cut the mirrors we framed them. Then we put hooks on the back of the wood frames. We will be sharing a post this week showing more details on how we framed and hung the mirrors we cut.

      Reply

  17. Chelsea

    I’ve been daunted by the idea of cutting a mirror but didn’t realize how simple it can be. Great idea to show a tutorial in video format! I might be trying this on a friend’s bathroom mirror soon!

    Reply

Leave a Reply to Chelsea Cancel reply

Your email address will not be published. Required fields are marked *

Get 25% off our DIY project plans this month!

X